Make sure to check the motor rotation and other startup checklist items, this is just a quick way to get the parameters entered. You will have to program the motor info (Motor FLA etc) manually. of LCP” meaning that all the parameters except the motor data will be sent to the new vfd. ![]() Quick menu for brief commissioning.Saving and copying parameter sets. Parameter 0-50 set to “All from LCP” Takes the saved data FROM the LCP into the drive VLT Control Panel LCP 102 130B1107 Graphic operating unit LCP102 Illuminated graphic display with plain text. JESS Technology industrial electronic repair service. If the new drive is the same size as the saved drive then:ģ. Remove the keypad by tilting down from the top, install keypad in the drive that you want to program The “LCP” is Danfoss jargon for the keypad, this saves all the existing parameters TO the keypadĢ. ![]() 1LCP 2 Panel door Illustration 1.3 Connection at Panel Illustration 1. Parameter 0-50 LCP Copy set to “All to LCP” Connect LCP cable at the frequency converter as shown in Illustration 1.4. This process is very useful as a fast way to program drives- say that you have 1 vfd setup the way you want, and you want to copy those parameters to all of the other vfds exactly.ġ. ![]() Hi- Today a customer was asking how to copy and save Danfoss VFD parameters to the keypad.
0 Comments
Leave a Reply. |